Expected gains of +33 BHP and +58 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Hyundai Santa Fe 2.2 CRDi 197hp? A Stage 1 remap can take this 2006 - 2013 diesel engine from 197 BHP to 230 BHP and from 422 Nm to 480 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai Santa Fe can achieve.
The Hyundai Santa Fe 2.2 CRDi 197hp is a 2.2L turbocharged diesel engine producing 197 BHP and 422 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 230 BHP and 480 Nm — a gain of around 33 BHP (17%) and 58 Nm (14%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.2 CRDi 150hp | 150 → 180 | +30 | 350 → 420 | +70 | Good (7.5/10) |
Get a personalised remap quote for your Hyundai Santa Fe. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.