Considering an ECU remap for your Hyundai Verna 1.5 CRDi 110hp? A Stage 1 remap can take this 2010 -> diesel engine from 110 BHP to 140 BHP and from 240 Nm to 300 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai Verna can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Hyundai Verna 1.5 CRDi 110hp is a 1.5L turbocharged diesel engine producing 110 BHP and 240 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 300 Nm — a gain of around 30 BHP (27%) and 60 Nm (25%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.6i 16V 112hp | 112 → 124 |
| +12 |
| 146 → 160 |
| +14 |
| Moderate (4.5/10) |
Get a personalised remap quote for your Hyundai Verna. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
