Considering an ECU remap for your Infiniti QX30 2.2d 170hp? A Stage 1 remap can take this 2016 -> diesel engine from 170 BHP to 205 BHP and from 350 Nm to 420 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Infiniti QX30 can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Infiniti QX30 2.2d 170hp is a 2.1L turbocharged diesel engine producing 170 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 205 BHP and 420 Nm — a gain of around 35 BHP (21%) and 70 Nm (20%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque |
|---|
| Gain |
|---|
| Score |
|---|
| 2.0T 211hp | 211 → 250 | +39 | 350 → 400 | +50 | Good (7/10) |
Get a personalised remap quote for your Infiniti QX30. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
