Expected gains of +32 BHP and +70 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Isuzu D-Max 2.5D twinturbo 163hp? A Stage 1 remap can take this 2012 - 2016 diesel engine from 163 BHP to 195 BHP and from 400 Nm to 470 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Isuzu D-Max can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Isuzu D-Max 2.5D twinturbo 163hp is a 2.5L turbocharged diesel engine producing 163 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 195 BHP and 470 Nm — a gain of around 32 BHP (20%) and 70 Nm (18%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Get a personalised remap quote for your Isuzu D-Max. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.