Considering an ECU remap for your Isuzu D-Max 3.0D 177hp? A Stage 1 remap can take this 2016 - 2019 diesel engine from 177 BHP to 200 BHP and from 380 Nm to 420 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Isuzu D-Max can achieve.
The Isuzu D-Max 3.0D 177hp is a 3.0L turbocharged diesel engine producing 177 BHP and 380 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 420 Nm — a gain of around 23 BHP (13%) and 40 Nm (11%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.9D 164hp | 164 → 200 | +36 | 360 → 440 | +80 | Good (7.5/10) |
Get a personalised remap quote for your Isuzu D-Max. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
