
Considering an ECU remap for your Iveco EuroStar 375hp? A Stage 1 remap can take this All diesel engine from 375 BHP to 435 BHP and from 1540 Nm to 1890 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Iveco EuroStar can achieve.
The Iveco EuroStar 375hp is a turbocharged diesel engine producing 375 BHP and 1540 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 435 BHP and 1890 Nm — a gain of around 60 BHP (16%) and 350 Nm (23%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 390hp | 390 → 450 | +60 | 1850 → 2250 | +400 | Good (7/10) |
| 420hp | 420 → 490 | +70 | 1900 → 2280 | +380 | Good (7/10) |
| 430hp | 430 → 495 | +65 | 1900 → 2280 | +380 | Good (7/10) |
| 520hp | 520 → 590 | +70 | 2300 → 2700 | +400 | Good (7/10) |
Get a personalised remap quote for your Iveco EuroStar. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.