Considering an ECU remap for your Jac T6 2.0 TDI 139hp? A Stage 1 remap can take this 2015 -> diesel engine from 139 BHP to 170 BHP and from 320 Nm to 370 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jac T6 can achieve.
The Jac T6 2.0 TDI 139hp is a 2.0L turbocharged diesel engine producing 139 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 170 BHP and 370 Nm — a gain of around 31 BHP (22%) and 50 Nm (16%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Get a personalised remap quote for your Jac T6. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
