Expected gains of +30 BHP and +80 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Jaguar E Pace P200 (2.0T) 200hp? A Stage 1 remap can take this 2021 -> ... petrol mhev engine from 200 BHP to 230 BHP and from 320 Nm to 400 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jaguar E Pace can achieve.
The Jaguar E Pace P200 (2.0T) 200hp is a 2.0L turbocharged petrol mhev engine producing 200 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 230 BHP and 400 Nm — a gain of around 30 BHP (15%) and 80 Nm (25%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
From a technical perspective, the transmission is many variants use zf 8-speed automatic (where fitted)..
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| P300e (1.5T) 309hp | 309 → 340 | +31 | 540 → 595 | +55 | Good (6/10) |
Get a personalised remap quote for your Jaguar E Pace. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.