Expected gains of +20 BHP and +20 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Jaguar F Pace 5.0 V8 SVR 550hp? A Stage 1 remap can take this 2020 -> ... petrol engine from 550 BHP to 570 BHP and from 700 Nm to 720 Nm of torque (naturally aspirated). This engine scores 3/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jaguar F Pace can achieve.
The Jaguar F Pace 5.0 V8 SVR 550hp is a 5.0L naturally aspirated petrol engine producing 550 BHP and 700 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 570 BHP and 720 Nm — a gain of around 20 BHP (4%) and 20 Nm (3%).
This engine has low remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
From a technical perspective, the transmission is many variants use zf 8-speed automatic (where fitted). at this torque level, transmission and driveline servicing history becomes especially important..
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Get a personalised remap quote for your Jaguar F Pace. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.