Considering an ECU remap for your Jaguar F type 2.0 Turbo 300hp? A Stage 1 remap can take this 2020 -> petrol engine from 300 BHP to 325 BHP and from 400 Nm to 450 Nm of torque (turbocharged). This engine scores 6/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jaguar F type can achieve.
The Jaguar F type 2.0 Turbo 300hp is a 2.0L turbocharged petrol engine producing 300 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 325 BHP and 450 Nm — a gain of around 25 BHP (8%) and 50 Nm (12%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
From a technical perspective, the transmission is many variants use zf 8-speed automatic (where fitted). at this torque level, transmission and driveline servicing history becomes especially important..
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Get a personalised remap quote for your Jaguar F type. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
