Considering an ECU remap for your Jaguar XE P250 (2.0T) 250hp? A Stage 1 remap can take this 2019 -> petrol engine from 250 BHP to 260 BHP and from 365 Nm to 440 Nm of torque (turbocharged). This engine scores 6/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jaguar XE can achieve.
The Jaguar XE P250 (2.0T) 250hp is a 2.0L turbocharged petrol engine producing 250 BHP and 365 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 260 BHP and 440 Nm — a gain of around 10 BHP (4%) and 75 Nm (21%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
From a technical perspective, the transmission is many variants use zf 8-speed automatic (where fitted)..
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| P300 (2.0T) 300hp | 300 → 320 | +20 | 400 → 450 | +50 | Moderate (5.5/10) |
Get a personalised remap quote for your Jaguar XE. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
