Considering an ECU remap for your Jeep Cherokee 2.8 CRD 158hp? A Stage 1 remap can take this 2005 - 2008 diesel engine from 158 BHP to 195 BHP and from 400 Nm to 465 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jeep Cherokee can achieve.
The Jeep Cherokee 2.8 CRD 158hp is a 2.8L turbocharged diesel engine producing 158 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 195 BHP and 465 Nm — a gain of around 37 BHP (23%) and 65 Nm (16%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.8 CRD 163hp | 163 → 210 | +47 | 400 → 520 | +120 | Good (7/10) |
Get a personalised remap quote for your Jeep Cherokee. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
