Considering an ECU remap for your Jeep Cherokee 2.0 CRD 140hp? A Stage 1 remap can take this 2014 -> diesel engine from 140 BHP to 185 BHP and from 350 Nm to 400 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jeep Cherokee can achieve.
The Jeep Cherokee 2.0 CRD 140hp is a 2.0L turbocharged diesel engine producing 140 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 185 BHP and 400 Nm — a gain of around 45 BHP (32%) and 50 Nm (14%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 CRD 170hp | 170 → 200 | +30 | 350 → 425 | +75 | Good (7/10) |
| 2.2 CRD 185hp | 185 → 200 | +15 | 440 → 500 | +60 | Good (6.5/10) |
| 2.2 CRD 200hp | 200 → 210 | +10 | 440 → 500 | +60 | Moderate (5.5/10) |
| 3.2 V6 270hp | 270 → 290 | +20 | 324 → 345 | +21 | Moderate (4/10) |
| 2.0T 272hp | 272 → 300 | +28 | 400 → 450 | +50 | Good (6/10) |
Get a personalised remap quote for your Jeep Cherokee. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
