Considering an ECU remap for your Jeep Liberty 2.8 CRD 160hp? A Stage 1 remap can take this 2005 - 2012 diesel engine from 160 BHP to 195 BHP and from 400 Nm to 465 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jeep Liberty can achieve.
The Jeep Liberty 2.8 CRD 160hp is a 2.8L turbocharged diesel engine producing 160 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 195 BHP and 465 Nm — a gain of around 35 BHP (22%) and 65 Nm (16%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 3.7 V6 - 210hp | 210 → 230 | +20 | 318 → 340 | +22 | Moderate (4/10) |
Get a personalised remap quote for your Jeep Liberty. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
