Considering an ECU remap for your Jeep Wrangler 3.6 V6 285hp? A Stage 1 remap can take this 2010 - 2016 petrol engine from 285 BHP to 305 BHP and from 353 Nm to 375 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jeep Wrangler can achieve.
The Jeep Wrangler 3.6 V6 285hp is a 3.6L naturally aspirated petrol engine producing 285 BHP and 353 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 305 BHP and 375 Nm — a gain of around 20 BHP (7%) and 22 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.8 CRD 200hp | 200 → 235 | +35 | 410 → 520 | +110 | Good (7.5/10) |
| 3.8 V6 200hp | 200 → 220 | +20 | 321 → 340 | +19 | Moderate (4/10) |
Get a personalised remap quote for your Jeep Wrangler. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
