Considering an ECU remap for your Jeep Wrangler 2.2 CRDi 200hp? A Stage 1 remap can take this 2017 -> diesel engine from 200 BHP to 230 BHP and from 450 Nm to 480 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jeep Wrangler can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Jeep Wrangler 2.2 CRDi 200hp is a 2.2L turbocharged diesel engine producing 200 BHP and 450 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 230 BHP and 480 Nm — a gain of around 30 BHP (15%) and 30 Nm (7%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain |
|---|
| Score |
|---|
| 2.8 CRDi 200hp | 200 → 235 | +35 | 460 → 520 | +60 | Good (7/10) |
| 2.0T 272hp | 272 → 300 | +28 | 400 → 450 | +50 | Good (6/10) |
| 3.6 V6 285hp | 285 → 305 | +20 | 353 → 375 | +22 | Moderate (4/10) |
| 2.0T 4xe 380hp | 380 → 405 | +25 | 637 → 700 | +63 | Moderate (5.5/10) |
Get a personalised remap quote for your Jeep Wrangler. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
