Considering an ECU remap for your Kia K7 2.4i 192hp? A Stage 1 remap can take this 2017 -> petrol engine from 192 BHP to 218 BHP and from 245 Nm to 267 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia K7 can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Kia K7 2.4i 192hp is a 2.4L naturally aspirated petrol engine producing 192 BHP and 245 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 218 BHP and 267 Nm — a gain of around 26 BHP (14%) and 22 Nm (9%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|
| 3.3 GDI V6 294hp | 294 → 315 | +21 | 343 → 367 | +24 | Moderate (4/10) |
Get a personalised remap quote for your Kia K7. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
