Considering an ECU remap for your Kia Mohave 3.0 CRDI 250hp? A Stage 1 remap can take this All diesel engine from 250 BHP to 290 BHP and from 540 Nm to 620 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Mohave can achieve.
The Kia Mohave 3.0 CRDI 250hp is a 3.0L turbocharged diesel engine producing 250 BHP and 540 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 290 BHP and 620 Nm — a gain of around 40 BHP (16%) and 80 Nm (15%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 3.8 24v V6 274hp | 274 → 295 | +21 | 369 → 399 | +30 | Moderate (4/10) |
Get a personalised remap quote for your Kia Mohave. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
