Considering an ECU remap for your Kia Picanto 1.0 66hp? A Stage 1 remap can take this 2017 - 2019 petrol engine from 66 BHP to 78 BHP and from 96 Nm to 110 Nm of torque (naturally aspirated). This engine scores 5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Picanto can achieve.
The Kia Picanto 1.0 66hp is a 1.0L naturally aspirated petrol engine producing 66 BHP and 96 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 78 BHP and 110 Nm — a gain of around 12 BHP (18%) and 14 Nm (15%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.2i 84hp | 84 → 95 | +11 | 120 → 133 | +13 | Moderate (4.5/10) |
| 1.0 T-GDI 100hp | 100 → 140 | +40 | 172 → 230 | +58 | Excellent (8/10) |
Get a personalised remap quote for your Kia Picanto. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
