Considering an ECU remap for your Kia ProCeed 1.6 CRDi 110hp? A Stage 1 remap can take this 2013 - 2015 diesel engine from 110 BHP to 145 BHP and from 260 Nm to 320 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia ProCeed can achieve.
The Kia ProCeed 1.6 CRDi 110hp is a 1.6L turbocharged diesel engine producing 110 BHP and 260 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 145 BHP and 320 Nm — a gain of around 35 BHP (32%) and 60 Nm (23%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.4 CRDi 90hp | 90 → 125 | +35 | 220 → 290 | +70 | Excellent (8.5/10) |
| 1.6 CRDi 128hp | 128 → 155 | +27 | 260 → 320 | +60 |
| 1.6 GDI 135hp | 135 → 145 | +10 | 164 → 175 | +11 | Moderate (4/10) |
| GT 1.6 T-GDi 204hp | 204 → 240 | +36 | 265 → 320 | +55 | Good (7/10) |
Get a personalised remap quote for your Kia ProCeed. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
