Considering an ECU remap for your Kia Seltos 1.6 CRDI 136hp? A Stage 1 remap can take this 2019 -> diesel engine from 136 BHP to 160 BHP and from 320 Nm to 330 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Seltos can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Kia Seltos 1.6 CRDI 136hp is a 1.6L turbocharged diesel engine producing 136 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 330 Nm — a gain of around 24 BHP (18%) and 10 Nm (3%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.4 T-GDI 140hp | 140 → 175 | +35 | 242 → 310 | +68 |
| Good (7.5/10) |
| 1.6 T-GDI 177hp | 177 → 210 | +33 | 265 → 350 | +85 | Good (7.5/10) |
Get a personalised remap quote for your Kia Seltos. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
