Considering an ECU remap for your Kia Sorento 2.5 CRDi 163hp? A Stage 1 remap can take this 2007 - 2009 diesel engine from 163 BHP to 200 BHP and from 392 Nm to 460 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Sorento can achieve.
The Kia Sorento 2.5 CRDi 163hp is a 2.5L turbocharged diesel engine producing 163 BHP and 392 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 460 Nm — a gain of around 37 BHP (23%) and 68 Nm (17%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.5 CRDi 170hp | 170 → 200 | +30 | 392 → 460 | +68 | Good (6.5/10) |
Get a personalised remap quote for your Kia Sorento. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
