Considering an ECU remap for your Kia Telluride 3.8 V6 291hp? A Stage 1 remap can take this 2019 - 2022 petrol engine from 291 BHP to 320 BHP and from 355 Nm to 380 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Telluride can achieve.
The Kia Telluride 3.8 V6 291hp is a 3.8L naturally aspirated petrol engine producing 291 BHP and 355 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 320 BHP and 380 Nm — a gain of around 29 BHP (10%) and 25 Nm (7%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Get a personalised remap quote for your Kia Telluride. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
