Expected gains of +32 BHP and +60 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Lancia Voyager 2.8 Multijet 163hp? A Stage 1 remap can take this 2011 -> diesel engine from 163 BHP to 195 BHP and from 360 Nm to 420 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Lancia Voyager can achieve.
The Lancia Voyager 2.8 Multijet 163hp is a 2.8L turbocharged diesel engine producing 163 BHP and 360 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 195 BHP and 420 Nm — a gain of around 32 BHP (20%) and 60 Nm (17%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.8 Multijet 178hp | 178 → 215 | +37 | 360 → 500 | +140 | Good (7.5/10) |
Get a personalised remap quote for your Lancia Voyager. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.