Expected gains of +25 BHP and +50 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Lancia Ypsilon 1.3 Multijet 95hp? A Stage 1 remap can take this 2016 -> diesel engine from 95 BHP to 120 BHP and from 200 Nm to 250 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Lancia Ypsilon can achieve.
The Lancia Ypsilon 1.3 Multijet 95hp is a 1.3L turbocharged diesel engine producing 95 BHP and 200 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 120 BHP and 250 Nm — a gain of around 25 BHP (26%) and 50 Nm (25%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 0.9 Twinair 80hp | 80 → 100 | +20 | 145 → 190 | +45 | Good (7.5/10) |
Get a personalised remap quote for your Lancia Ypsilon. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.