Expected gains of +50 BHP and +50 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Land Rover Velar D300 (3.0D) 300hp? A Stage 1 remap can take this 2020 - 2023 diesel engine from 300 BHP to 350 BHP and from 700 Nm to 750 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Land Rover Velar can achieve.
The Land Rover Velar D300 (3.0D) 300hp is a 3.0L turbocharged diesel engine producing 300 BHP and 700 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 350 BHP and 750 Nm — a gain of around 50 BHP (17%) and 50 Nm (7%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
From a technical perspective, the transmission is many variants use zf 8-speed automatic (where fitted). at this torque level, transmission and driveline servicing history becomes especially important..
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| P250 (2.0T) 250hp | 250 → 260 | +10 | 365 → 440 | +75 | Good (6/10) |
Get a personalised remap quote for your Land Rover Velar. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.