Considering an ECU remap for your Lincoln MKC 2.3 GTDI 285hp? A Stage 1 remap can take this 2014 - 2017 petrol engine from 285 BHP to 320 BHP and from 414 Nm to 520 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Lincoln MKC can achieve.
The Lincoln MKC 2.3 GTDI 285hp is a 2.3L turbocharged petrol engine producing 285 BHP and 414 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 320 BHP and 520 Nm — a gain of around 35 BHP (12%) and 106 Nm (26%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 GTDI 240hp | 240 → 270 | +30 | 366 → 420 | +54 | Good (6/10) |
Get a personalised remap quote for your Lincoln MKC. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
