Considering an ECU remap for your Lincoln MKX 2.7T 335hp? A Stage 1 remap can take this 2016 -> petrol engine from 335 BHP to 360 BHP and from 515 Nm to 550 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Lincoln MKX can achieve.
The Lincoln MKX 2.7T 335hp is a 2.7L turbocharged petrol engine producing 335 BHP and 515 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 360 BHP and 550 Nm — a gain of around 25 BHP (7%) and 35 Nm (7%).
This engine has moderate remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0T 245hp | 245 → 270 | +25 | 373 → 420 | +47 | Good (6/10) |
Get a personalised remap quote for your Lincoln MKX. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
