Expected gains of +80 BHP and +80 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Lincoln MKZ 3.0T Ecoboost V6 350hp? A Stage 1 remap can take this 2017 -> petrol engine from 350 BHP to 430 BHP and from 540 Nm to 620 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Lincoln MKZ can achieve.
The Lincoln MKZ 3.0T Ecoboost V6 350hp is a 3.0L turbocharged petrol engine producing 350 BHP and 540 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 430 BHP and 620 Nm — a gain of around 80 BHP (23%) and 80 Nm (15%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0T Ecoboost 245hp | 245 → 270 | +25 | 373 → 430 | +57 |
| Good (6/10) |
| 3.0T Ecoboost V6 400hp | 400 → 430 | +30 | 540 → 620 | +80 | Good (6/10) |
Get a personalised remap quote for your Lincoln MKZ. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.