Considering an ECU remap for your Mahindra Genio 2.2 CRDi 120hp? A Stage 1 remap can take this All diesel engine from 120 BHP to 160 BHP and from 290 Nm to 380 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mahindra Genio can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Mahindra Genio 2.2 CRDi 120hp is a 2.2L turbocharged diesel engine producing 120 BHP and 290 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 380 Nm — a gain of around 40 BHP (33%) and 90 Nm (31%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: economy gains unlikely at full power; depends on driving style.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain |
|---|
| Torque |
|---|
| Gain |
|---|
| Score |
|---|
| 2.2 CRDi 140hp | 140 → 160 | +20 | 290 → 380 | +90 | Good (7.5/10) |
Get a personalised remap quote for your Mahindra Genio. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
