Expected gains of +20 BHP and +90 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Mahindra Quanto 2.2 CRDi 140hp? A Stage 1 remap can take this All diesel engine from 140 BHP to 160 BHP and from 290 Nm to 380 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mahindra Quanto can achieve.
The Mahindra Quanto 2.2 CRDi 140hp is a 2.2L turbocharged diesel engine producing 140 BHP and 290 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 380 Nm — a gain of around 20 BHP (14%) and 90 Nm (31%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: economy gains unlikely at full power; depends on driving style.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.2 CRDi 120hp | 120 → 160 | +40 | 290 → 380 | +90 | Excellent (8.5/10) |
Get a personalised remap quote for your Mahindra Quanto. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.