Expected gains of +20 BHP and +100 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Mahindra XUV500 2.2 CRDi 170hp? A Stage 1 remap can take this All diesel engine from 170 BHP to 190 BHP and from 340 Nm to 440 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mahindra XUV500 can achieve.
The Mahindra XUV500 2.2 CRDi 170hp is a 2.2L turbocharged diesel engine producing 170 BHP and 340 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 440 Nm — a gain of around 20 BHP (12%) and 100 Nm (29%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.2 CRDi 140hp | 140 → 190 | +50 | 330 → 440 | +110 | Excellent (8/10) |
Get a personalised remap quote for your Mahindra XUV500. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.