Considering an ECU remap for your Mazda 6 2.2 SkyActiv-D 175hp? A Stage 1 remap can take this 2013 - 2018 diesel engine from 175 BHP to 200 BHP and from 420 Nm to 460 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mazda 6 can achieve.
The Mazda 6 2.2 SkyActiv-D 175hp is a 2.2L turbocharged diesel engine producing 175 BHP and 420 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 460 Nm — a gain of around 25 BHP (14%) and 40 Nm (10%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 SkyActiv-G 145hp | 145 → 170 | +25 | 210 → 230 | +20 | Moderate (4.5/10) |
| 150 → 200 |
| +50 |
| 380 → 460 |
| +80 |
| Good (7.5/10) |
| 2.0 SkyActiv-G 165hp | 165 → 170 | +5 | 210 → 220 | +10 | Limited (3.5/10) |
| 2.5 SkyActiv-G 192hp | 192 → 205 | +13 | 256 → 270 | +14 | Moderate (4/10) |
Get a personalised remap quote for your Mazda 6. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
