Considering an ECU remap for your Mazda 6 2.2 SkyActiv-D 184hp? A Stage 1 remap can take this 2018 -> ... diesel engine from 184 BHP to 210 BHP and from 445 Nm to 480 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mazda 6 can achieve.
The Mazda 6 2.2 SkyActiv-D 184hp is a 2.2L turbocharged diesel engine producing 184 BHP and 445 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 210 BHP and 480 Nm — a gain of around 26 BHP (14%) and 35 Nm (8%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.2 SkyActiv-D 150hp | 150 → 200 | +50 | 380 → 460 | +80 | Good (7.5/10) |
| 165 → 170 |
| +5 |
| 210 → 220 |
| +10 |
| Limited (3.5/10) |
| 2.5 SkyActiv-G 194hp | 194 → 205 | +11 | 256 → 270 | +14 | Moderate (4/10) |
Get a personalised remap quote for your Mazda 6. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
