Considering an ECU remap for your Mazda BT-50 3.2 TDCi 200hp? A Stage 1 remap can take this All diesel engine from 200 BHP to 235 BHP and from 470 Nm to 550 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mazda BT-50 can achieve.
The Mazda BT-50 3.2 TDCi 200hp is a 3.2L turbocharged diesel engine producing 200 BHP and 470 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 235 BHP and 550 Nm — a gain of around 35 BHP (18%) and 80 Nm (17%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.5 CiTD 143hp | 143 → 180 | +37 | 330 → 420 | +90 | Good (7.5/10) |
| 2.2 TDCI 155hp | 155 → 185 | +30 | 360 → 440 | +80 | Good (7.5/10) |
Get a personalised remap quote for your Mazda BT-50. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
