Expected gains of +30 BHP and +72 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Mazda CX-9 2.5 SkyActiv-G 230hp? A Stage 1 remap can take this 2016 -> petrol engine from 230 BHP to 260 BHP and from 420 Nm to 492 Nm of torque (naturally aspirated). This engine scores 5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mazda CX-9 can achieve.
The Mazda CX-9 2.5 SkyActiv-G 230hp is a 2.5L naturally aspirated petrol engine producing 230 BHP and 420 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 260 BHP and 492 Nm — a gain of around 30 BHP (13%) and 72 Nm (17%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Get a personalised remap quote for your Mazda CX-9. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.