Expected gains of +20 BHP and +60 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Mercedes-Benz Citan 111 CDI 110hp? A Stage 1 remap can take this 2013 - 2018 diesel engine from 110 BHP to 130 BHP and from 240 Nm to 300 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz Citan can achieve.
The Mercedes-Benz Citan 111 CDI 110hp is a 1.5L turbocharged diesel engine producing 110 BHP and 240 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 130 BHP and 300 Nm — a gain of around 20 BHP (18%) and 60 Nm (25%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 108 CDI 75hp | 75 → 115 | +40 | 180 → 260 | +80 | Excellent (8.5/10) |
| 109 CDI 90hp | 90 → 110 | +20 | 200 → 240 | +40 |
| Excellent (8/10) |
| 112 - 114hp | 114 → 125 | +11 | 190 → 205 | +15 | Moderate (4/10) |
Get a personalised remap quote for your Mercedes-Benz Citan. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.