Expected gains of +87 BHP and +100 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Mercedes-Benz E 220 CDI BlueTEC 163hp? A Stage 1 remap can take this W212 - 2013 - 2016 diesel engine from 163 BHP to 250 BHP and from 400 Nm to 500 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz E can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Mercedes-Benz E 220 CDI BlueTEC 163hp is a 2.1L turbocharged diesel engine producing 163 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 250 BHP and 500 Nm — a gain of around 87 BHP (53%) and 100 Nm (25%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 200 CDI 136hp | 136 → 200 | +64 | 360 → 460 | +100 | Excellent (8/10) |
| 200 CDI BlueTEC 136hp | 136 → 200 | +64 | 360 → 460 | +100 | Excellent (8/10) |
| 220 CDI 170hp | 170 → 220 | +50 | 400 → 500 | +100 | Good (7.5/10) |
| 220 CDI BlueTEC 170hp | 170 → 250 | +80 | 400 → 500 | +100 | Excellent (8.5/10) |
| 200 CGi 184hp | 184 → 230 | +46 | 300 → 420 | +120 | Excellent (8/10) |
| 250 CDI 204hp | 204 → 240 | +36 | 500 → 550 | +50 | Good (6.5/10) |
| 250 CDI BlueTec 204hp | 204 → 240 | +36 | 500 → 550 | +50 | Good (6.5/10) |
| 250 CGi 211hp | 211 → 230 | +19 | 350 → 420 | +70 | Good (6/10) |
| 300 CDI BlueTec Hybrid 231hp | 231 → 260 | +29 | 540 → 600 | +60 | Good (6.5/10) |
| 300 CGi 252hp | 252 → 312 | +60 | 340 → 390 | +50 | Good (7/10) |
| 350 CDI 252hp | 252 → 290 | +38 | 620 → 690 | +70 | Good (6.5/10) |
| 350 CDI BlueTec 258hp | 258 → 290 | +32 | 620 → 690 | +70 | Good (6.5/10) |
| 350 CGi 306hp | 306 → 320 | +14 | 370 → 390 | +20 | Moderate (5/10) |
| 400 CGi 333hp | 333 → 400 | +67 | 480 → 580 | +100 | Good (7.5/10) |
| 500 CGi 408hp | 408 → 510 | +102 | 600 → 850 | +250 | Excellent (8/10) |
| 63 AMG 558hp | 558 → 685 | +127 | 720 → 1100 | +380 | Good (6.5/10) |
| 63 AMG S 585hp | 585 → 685 | +100 | 800 → 1100 | +300 | Moderate (5.5/10) |
Get a personalised remap quote for your Mercedes-Benz E. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.