Mercedes-Benz Vaneo 3.0 CDI 204hp Remap

The Mercedes-Benz Vaneo 3.0 CDI 204hp is a 3.0L turbocharged diesel engine producing 204 BHP and 440 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 240 BHP and 520 Nm — a gain of around 36 BHP (18%) and 80 Nm (18%).

This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.

Considerations: High tuned torque: check transmission torque capacity and service history.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.

Fuel economy note: possible improvement with conservative driving.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.