Expected gains of +37 BHP and +80 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Mercedes-Benz Viano 2.2 CDI 163hp? A Stage 1 remap can take this 2010 -> diesel engine from 163 BHP to 200 BHP and from 360 Nm to 440 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz Viano can achieve.
The Mercedes-Benz Viano 2.2 CDI 163hp is a 2.2L turbocharged diesel engine producing 163 BHP and 360 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 440 Nm — a gain of around 37 BHP (23%) and 80 Nm (22%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 CDI 136hp | 136 → 200 | +64 | 310 → 440 | +130 | Excellent (8/10) |
| 3.0 CDI V6 224hp | 224 → 265 | +41 | 440 → 580 | +140 | Good (7.5/10) |
Get a personalised remap quote for your Mercedes-Benz Viano. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.