Mercedes-Benz Vito 116 CDI 163hp (2100cc) Remap

The Mercedes-Benz Vito 116 CDI 163hp (2100cc) is a 2.1L turbocharged diesel engine producing 163 BHP and 380 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 215 BHP and 490 Nm — a gain of around 52 BHP (32%) and 110 Nm (29%).

This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

Considerations: High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.

Fuel economy note: possible improvement with conservative driving.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.