Mercedes-Benz Vito 122 CDI V6 224hp Remap

The Mercedes-Benz Vito 122 CDI V6 224hp is a 1.9L turbocharged diesel engine producing 224 BHP and 440 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 260 BHP and 580 Nm — a gain of around 36 BHP (16%) and 140 Nm (32%).

This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

Considerations: High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.

Fuel economy note: economy gains unlikely at full power; depends on driving style.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.