Considering an ECU remap for your MG 550 1.8T 160hp? A Stage 1 remap can take this 2008 - > petrol engine from 160 BHP to 190 BHP and from 215 Nm to 285 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your MG 550 can achieve.
The MG 550 1.8T 160hp is a 1.8L turbocharged petrol engine producing 160 BHP and 215 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 285 Nm — a gain of around 30 BHP (19%) and 70 Nm (33%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.8L 130hp | 130 → 140 | +10 | 168 → 185 |
| +17 |
| Moderate (4/10) |
Get a personalised remap quote for your MG 550. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
