Considering an ECU remap for your MG 6 1.8T 160hp? A Stage 1 remap can take this 2011 -> petrol engine from 160 BHP to 190 BHP and from 215 Nm to 270 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your MG 6 can achieve.
The MG 6 1.8T 160hp is a 1.8L turbocharged petrol engine producing 160 BHP and 215 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 270 Nm — a gain of around 30 BHP (19%) and 55 Nm (26%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.9D 150hp | 150 → 180 | +30 | 350 → 410 | +60 | Good (7/10) |
| 1.5T 169hp | 169 → 200 | +31 | 250 → 290 | +40 | Good (7/10) |
| 1.5T 182hp | 182 → 200 | +18 | 285 → 310 | +25 | Moderate (5.5/10) |
Get a personalised remap quote for your MG 6. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
