Considering an ECU remap for your Mitsubishi ASX 1.3 DI-T 140hp? A Stage 1 remap can take this 2022 -> ... petrol mhev engine from 140 BHP to 155 BHP and from 260 Nm to 300 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mitsubishi ASX can achieve.
The Mitsubishi ASX 1.3 DI-T 140hp is a 1.3L naturally aspirated petrol mhev engine producing 140 BHP and 260 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 155 BHP and 300 Nm — a gain of around 15 BHP (11%) and 40 Nm (15%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.0 MPI-T 91hp | 91 → 110 | +19 | 160 → 200 | +40 | Moderate (5.5/10) |
Get a personalised remap quote for your Mitsubishi ASX. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
