Considering an ECU remap for your Mitsubishi L200 2.3 DiD 150hp? A Stage 1 remap can take this 2019 - 2023 diesel engine from 150 BHP to 180 BHP and from 400 Nm to 460 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mitsubishi L200 can achieve.
The Mitsubishi L200 2.3 DiD 150hp is a 2.3L turbocharged diesel engine producing 150 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 460 Nm — a gain of around 30 BHP (20%) and 60 Nm (15%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.4 DiD 181hp | 181 → 205 | +24 | 430 → 500 | +70 | Good (6.5/10) |
Get a personalised remap quote for your Mitsubishi L200. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
