Expected gains of +35 BHP and +64 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Mitsubishi Lancer EVO 2.0 Turbo 295hp? A Stage 1 remap can take this IX petrol engine from 295 BHP to 330 BHP and from 366 Nm to 430 Nm of torque (turbocharged). This engine scores 6/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mitsubishi Lancer EVO can achieve.
The Mitsubishi Lancer EVO 2.0 Turbo 295hp is a 2.0L turbocharged petrol engine producing 295 BHP and 366 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 330 BHP and 430 Nm — a gain of around 35 BHP (12%) and 64 Nm (17%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 Turbo 280hp | 280 → 320 | +40 | 355 → 420 | +65 | Good (6.5/10) |
Get a personalised remap quote for your Mitsubishi Lancer EVO. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.