Expected gains of +40 BHP and +90 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Mitsubishi Lancer 2.0 DiD 140hp? A Stage 1 remap can take this All diesel engine from 140 BHP to 180 BHP and from 310 Nm to 400 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mitsubishi Lancer can achieve.
The Mitsubishi Lancer 2.0 DiD 140hp is a 2.0L turbocharged diesel engine producing 140 BHP and 310 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 400 Nm — a gain of around 40 BHP (29%) and 90 Nm (29%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.8 DiD 116hp | 116 → 160 | +44 | 300 → 360 | +60 | Excellent (8/10) |
| 1.8 DiD 150hp | 150 → 175 | +25 | 300 → 360 | +60 | Good (7/10) |
Get a personalised remap quote for your Mitsubishi Lancer. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.