Expected gains of +30 BHP and +57 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Mitsubishi Triton 3.2 TDCi 160hp? A Stage 1 remap can take this All diesel engine from 160 BHP to 190 BHP and from 373 Nm to 430 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mitsubishi Triton can achieve.
The Mitsubishi Triton 3.2 TDCi 160hp is a 3.2L turbocharged diesel engine producing 160 BHP and 373 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 430 Nm — a gain of around 30 BHP (19%) and 57 Nm (15%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.5 Di-D 178hp | 178 → 210 | +32 | 400 → 460 | +60 | Good (7/10) |
| 2.4 D4-D 181hp | 181 → 200 | +19 | 430 → 470 | +40 | Moderate (5.5/10) |
Get a personalised remap quote for your Mitsubishi Triton. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.