Nissan Cabstar / NT400 3.0 DCi 130hp Remap

The Nissan Cabstar / NT400 3.0 DCi 130hp is a 3.0L turbocharged diesel engine producing 130 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 415 Nm — a gain of around 50 BHP (38%) and 115 Nm (38%).

This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

Considerations: High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.

Fuel economy note: economy gains unlikely at full power; depends on driving style.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.